Anchormatic EW-500 12V/24V Windlass

Anchormatic EW-500 12V/24V Windlass

24 560 kr

In stock

24 560 kr

Windlass EW-500

Supplied with: Cables, junction box & control panel with counter.

SKU: 500
The anchor strap has a built-in marker that is used for the autostop function of the windlass. It is important that Anchormatic's original webbing is used for optimal function and strength.
Needed to hook the anchor to the anchor strap.
The windlass requires the use of a 60A circuit breaker for safe operation.
Skyddslock av mjuk plast som skyddar panelen mot repor, damm & fukt.
The board feedthrough is used if the strap is to extend through the transom to prevent wear on the anchor strap.
A remote control allows you to operate your windlass from anywhere in the boat.
Must be used if the anchor strap is to run at different angles.
Read more about the different anchor rollers under category (anchor rollers & anchor covers).
Total products
Total options
Total amount
Compare Compare

Description

Anchormatic Windlass EW-500

Full control

Lightweight compact model, weighing only 19 kg! A windlass that makes anchoring as easy as possible for everyone on board and is ideal for solo trips. You manage the anchoring process easily and smoothly from the driver's seat using the decoupling function. With the optional radio control, you can adjust your anchorage exactly to the centimeter (even from the shore), tensioning or releasing.

Quiet, smooth & compact

The drive motor is located in the belt drum, providing a quiet operation and isolating it from external influences. You don't need a drop or collection box for the belt because the rope driver guides the belt directly onto the drum, eliminating tangles and making the game space efficient.

Advantages of tapes

The strap is made of durable polyester and impregnated against water absorption. Comfortable to handle. Its breaking strength is 3 tons (stronger than an 8 mm chain). The wide surface of the strap provides a cushioning effect in the water, which in turn provides a spring effect when anchoring and mooring.

Mechanical decoupling

Completely mechanical release without electronics. Can with a simple manual grip release/lock the coupling on the windlass in case of a power failure. Power failure.

Low power consumption

Thanks to the drive, which has a 90% efficiency (compared to a traditional worm gear with only half the efficiency), this windlass has much higher traction in relation to the engine power, making the windlass extremely power efficient.

Car stop

With the automatic stop function, the anchor first stops in wash mode to rinse off the anchor if dirt is trapped and then crawls with greatly reduced power to park mode, where it stops automatically.

Digital calculator

With the digital counter on the DWR panel, you can check from the driver's seat that the anchor is deployed properly, and you can see how many meters of line are out when you come in to shore. Even when you winch the anchor in, the display shows you when the anchor comes up against the boat and you can prepare for departure, making for safer handling.

Advanced control electronics

Control panel Resistant IP 67 rated, shake & salt spray tested 20/ 55

User language Swedish/Norwegian/Finnish/English.

12V and 24V

The Anchormatic EW-500 windlass is available in two versions:
12 Volt motor and electronics
24 Volt motor and electronics.

 

Technical Data

  • weight 19kg (incl. 60m tape)
  • Free fall
  • Tape length 60 meters
  • 5 winch speeds, maximum speed 0.58m/s
  • Motor power 500w
  • Maximum traction force 500kg
  • Suitable for boats weighing up to 15 tons

Further information

Weight 19 kg

1 review of Anchormatic EW-500 12V/24V Anchor Windlasses

  1. 5 out of 5

    Jonas -

    Light, compact - fit perfectly in the stowage compartment!


Add a review